dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Line-A/C Discharge|Page 1224 > < Line-A/C Discharge|Page 1222
Page 1
background image

Hose/Line HVAC: Service and Repair
Line-A/C Liquid

LINE-A/C LIQUID

WARNING:  REFER TO THE APPLICABLE WARNINGS AND CAUTIONS FOR THIS SYSTEM BEFORE PERFORMING THE
FOLLOWING OPERATION. FAILURE TO FOLLOW THE WARNINGS AND CAUTIONS COULD RESULT IN POSSIBLE PERSONAL
INJURY OR DEATH.

NOTE:  The A/C liquid line is serviced in two sections. The rear section of the liquid line is serviced as an assembly with the rear section of the A/C
suction line.

FRONT SECTION

REMOVAL

1. Recover the refrigerant from the refrigerant system.
2. Disconnect and isolate the negative battery cable.
3. Remove the air cleaner housing.
4. Raise and support the vehicle.
5. Remove the front end splash shields.
6. Remove the nut (3) that secures the front section of the A/C liquid line (4) to the A/C condenser (5).
7. Disconnect the A/C liquid line from the A/C condenser and remove and discard the dual plane seal.
8. Install plugs in, or tape over the opened liquid line fitting  and condenser outlet port.

NOTE:  LHD model shown. RHD model similar.

Line-A/C Discharge|Page 1224 > < Line-A/C Discharge|Page 1222