Charger V6-3.5L VIN G (2006)
2.
Locate the power steering lines and clip on the right side of the engine compartment, (Fig. 1).
3.
Remove the original clip and screw from the power steering lines and discard them.
4.
Install the revised power steering line clip, p/n 05189290AA, on the lines, bend the tabs on the retainers away from the attaching screw hole after
assembling the clip onto the power steering lines, (Fig. 2).
5.
Attach the power steering lines/clip using the screw packaged with the clip. Tighten the screw to 21.5 Nm (190 in. lbs.).
6.
Use the procedures outlined in TechCONNECT 23-Body/Exterior/Belly Pan to install the belly pan.
POLICY:
Reimbursable within the provisions of the warranty.
