dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0300 Set|Page 4076 > < Engine, A/T Controls - 1-2 Upshift Shudder/Rough Shift|Page 4071
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - MIL ON/DTC P0300 Set

NUMBER: 18-016-06

GROUP: Vehicle Performance

DATE: May 4, 2006

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

UPDATE CD 6.05_SP4 WAS THE LAST CD TO CONTAIN FLASH FILES FOR StarSCAN.

SUBJECT:
Flash: MIL Illumination - DTC P0300 - Multiple Cylinder Misfire

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2006

(LX)

300/Charger/Magnum

NOTE:

This bulletin applies to models equipped with a 3.5L Engine, A580 Automatic Transmission and California Emissions (sales code EGG/DGJ and
NAE) built on or before May 2, 2006 (MDH 0502XX).

SYMPTOM/CONDITION:

The vehicle operator may experience MIL illumination with no other symptoms or conditions experienced. This condition may occur intermittently and
can be difficult to duplicate.

DIAGNOSIS:

Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DTC's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the vehicle is brought in due to MIL illumination and DTC P0300 - Multiple Cylinder Misfire was recorded, perform the Repair Procedure.

PARTS REQUIRED:

SPECIAL TOOLS / EQUIPMENT REQUIRED:

REPAIR PROCEDURE - USING THE INTERNET TO RETRIEVE THE FLASH FILE:

NOTE:

When performing this Repair Procedure, the software release level in the StarSCAN(R); must be programmed with 6.05 SP4 level software or

Engine Controls - MIL ON/DTC P0300 Set|Page 4076 > < Engine, A/T Controls - 1-2 Upshift Shudder/Rough Shift|Page 4071