Charger V6-3.5L VIN G (2006)
10. Once alignment is found to be within specifications, using a crowfoot wrench, tighten tension strut cradle bolt nut (2) to 176 Nm (130 ft. lbs.)
torque while holding the bolt stationary
11. Install belly pan.
Arm - Lower Control - AWD
ARM - LOWER CONTROL - AWD
REMOVAL
1. Raise and support vehicle.
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. While a helper applies brakes to keep hub from rotating, remove hub nut (1) from the axle half shaft (2).
4. Remove belly pan.
