Charger V6-3.5L VIN G (2006)
7. Remove propeller shaft rear coupler-to-flange bolts.
8. Remove center bearing (1) mounting bolts.
9. With the aid of a helper, remove propeller shaft assembly.
INSTALLATION - REAR
CAUTION: Propeller shaft installation is a two-man operation. Never allow propeller shaft to hang from the center bearing, or while only connected
to the transmission or rear axle flanges. A helper is required. If a propeller shaft section is hung unsupported, damage may occur to the shaft, coupler,
and/or center bearing from over-angulation. This may result in driveline vibrations and/or component failure.
COUPLER/DAMPER SERVICE