Charger V6-3.5L VIN G (2006)
6. Support spring link (1) using a transmission jack (5) or other appropriate jack. Raise spring link just enough to access brake caliper lower
mounting bolt (4) from above compression link (2).
7. Remove the lower and upper caliper mounting bolts (1).
8. Remove brake caliper (2) with pads from knuckle and brake rotor. Hang assembly out of way using wire or a bungee cord. Use care not to
overextend brake hose when doing this.
9. Remove any clips (3) retaining brake rotor (2) to wheel mounting studs.
10. Slide brake rotor (2) off hub and bearing (1).
