Charger V8-5.7L (2008)
Amplifier: Service and Repair
Amplifier - Installation
INSTALLATION
INSTRUMENT PANEL AMPLIFIER
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
1. Position amplifier (2) into place.
2. Install mounting fasteners (1).
3. Connect electrical harness connectors.
4. Install the steering column opening cover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Installation.
5. Connect battery negative cable.
REAR SHELF AMPLIFIER (SRT ONLY)