Charger V8-5.7L (2008)
to the decklid sill.
5. On all models, remove the two deck lid bumper stops (1).
6. Carefully pull the rear fascia assembly rearward to disengage the two push-pin retainers (2) from the slots (3) in each side of fascia and position
the fascia to gain access to the license lamp and park assist.
7. If equipped, disconnect the park assist sensor wire harness connector (2) from the tail lamp wire harness connector (1) and remove the rear fascia
assembly (3) from the vehicle.
8. If equipped and if required, remove the park assist senors from the rear fascia assembly. See: Accessories and Optional Equipment/Collision
Avoidance and Parking Assist Systems/Parking Assist Distance Sensor/Service and Repair/Park Assist Sensor - Removal.
9. If required on SRT8 models, remove the lower fascia from the rear fascia assembly and discard the metal retaining clips.
10. If required, remove and discard the nut insert (1) from each quarter panel and remove the two push-pin retainers (2).
