Charger V8-5.7L (2008)
26. Align propeller shaft index marks placed upon removal. Install propeller shaft rear coupler-to-axle flange bolts and nuts by hand. Tighten propeller
shaft rear coupler-to-axle flange bolts to 81 Nm (60 ft. lbs.).
27. Install fuel filler tube. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Fuel Filler Neck/Service and Repair/Installation
28. Clip left rear wheel speed sensor cable (3) to routing clip (1) near body connector.
