Charger V8-5.7L (2008)
Brake Rotor/Disc: Removal and Replacement
Front
FRONT
NOTE: Before proceeding, See: Service Precautions/Brakes - Caution.
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts(3), then tire and wheel assembly (1).
NOTE: In some cases, it may be necessary to retract caliper piston in its bore a small amount in order to provide sufficient clearance
between shoes and rotor to easily remove caliper from knuckle. This can usually be accomplished before mounting bolts are removed, by
grasping rear of caliper and pulling outward working with guide pins, thus retracting piston. Never push on piston directly as it may get
damaged.
3. AWD - Remove two bolts (1) securing disc brake caliper and adapter (2) to knuckle (3).
4. AWD - Remove disc brake caliper and adapter (2) from knuckle (3) as an assembly. Hang assembly out of way using wire or a bungee cord. Use
care not to overextend brake hose when doing this.
