Charger V8-5.7L (2008)
3. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
4. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
5. Remove banjo bolt (6) connecting flexible brake hose (1) to caliper (5). There are two sealing washers (7) (one one each side of hose fitting) that
will come off when bolt is removed. Discard these washers; install NEW washers on installation.
6. While holding guide pins from turning, remove caliper guide pin bolts (2).
7. Remove brake caliper (1) from brake adapter (3) and pads.
All-Wheel-Drive
ALL-WHEEL-DRIVE
NOTE: Before proceeding, See: Service Precautions/Brakes - Caution.