Charger V8-5.7L (2008)
4. Remove screw (2) fastening cable (1) routing bracket to rear crossmember front flange (3).
5. Remove nuts (1), bolt (2) and push-pins (4), securing lower rear wheelhouse shield (3) to body of vehicle. Remove lower rear wheelhouse shield.
6. Remove screw (6) and routing clip (4) nuts fastening cable (7) to underside of body (3).
7. Lower vehicle.
8. Remove driver door opening sill scuff plate and cowl side trim.
9. Remove clip and roll back carpet away from front cable.
