Charger V8-5.7L (2008)
CAUTION: Do not remove front parking brake cable from cable connector at lever without securing connector first. If not secured, cable
connector will wind up inside lever assembly making it most difficult to retrieve and reconnect to front cable upon installation.
6. Using pliers, reach up inside parking brake lever assembly and pull downward on parking brake cable connector. Secure cable connector (2) in
retaining fork (1) formed into parking brake lever bracket as shown.
7. Disengage and remove front parking brake cable strand (1) from cable connector (2), leaving cable connector secured in retaining fork.
8. Place 13 mm 12-point box wrench (2) over cable retainer (1) at lever bracket as shown to collapse retainer fingers. Pull cable from bracket.
