Charger V8-5.7L (2008)
5. Install lower condenser mounting bolts. Tighten bolts to 10 Nm (88 in. lbs.)
6. Install lower radiator hose (1) and clamp.
7. Lower vehicle.
8. Install the radiator fan See: Radiator Cooling Fan/Service and Repair/Radiator Fan - Installation.
9. Install upper radiator upper hose. Align hose so it does not interfere with the accessory drive belt or engine. Position hose clamp so it will not
interfere with the hood.
10. Install upper radiator closure panels.
11. Connect negative cable.
12. Fill cooling system with coolant See: Service and Repair.
13. Operate engine until it reaches normal operating temperature. Check cooling system and automatic transmission for correct fluid levels.
14. If equipped with ACC (Adaptive Cruise Control), module must be realigned. See: Cruise Control/Cruise Control Module/Service and
Repair/Procedures
