Charger V8-5.7L (2008)
5. Install the oil pumpSee: Engine Lubrication/Oil Pump/Service and Repair/Removal and Replacement/Engine Oil Pump - Installation.
6. Install the oil pick up tube.
7. Each tappet reused must be installed in the same position from which it was removed. When camshaft is replaced, all of the tappets must be
replaced.
CAUTION: The 5.7L LX engine uses both standard roller tappets and deactivating roller tappets, for use with the Multi Displacement
System. The deactivating roller tappets must be used in cylinders 1,4,6,7. The deactivating tappets can be identified by the two holes in
the side of the tappet body, for the latching pins.
8. Install tappets (2) and retaining yoke assembly (1). See: Lifter / Lash Adjuster/Service and Repair/Installation.
