Charger V8-5.7L (2008)
Rocker Arm Assembly: Service and Repair
Installation
INSTALLATION
CAUTION: The longer push rods are for the exhaust side, and the shorter push rods are for intake side.
1. Install the push rods in the same order as removed.
2. Install the push rod retainer (1) 9070.
CAUTION: Ensure that retainers (2) and rocker arms (4) are not overlapped when tightening bolts or engine damage could result.
CAUTION: Verify that push rod is installed into rocker arm (4) and tappet correctly while installing rocker shaft assembly or engine damage
could result. Recheck after rocker shaft has been tightened to specification.
