Charger V8-5.7L (2008)
NOTE: Do not pry on oil pan or oil pan gasket. Gasket is integral to engine windage tray and does not come out with oil pan.
NOTE: The horizontal M10 fasteners are 5 mm longer in length, and must be reinstalled in original locations.
13. Remove the M10 fasteners (vertical and horizontal) from the rear of the oil pan to the transmission and engine.
14. Remove the oil pan mounting bolts and oil pan.
NOTE: When the oil pan is removed, a new oil pan gasket/windage tray assembly must be installed. The old gasket cannot be reused.
15. Discard the integral windage tray and gasket and replace.
AWD
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the engine cover (1).
3. Remove the intake manifold. See: Intake Manifold/Service and Repair/Removal and Replacement/Intake Manifold - Removal.
4. Install engine lift fixture (2) special tool # 8984 and adapter # 8984-UPD. Never use air tools when installing fasteners to engine.
5. Raise vehicle.
