Charger V8-5.7L (2008)
Evaporator Temperature Sensor / Switch: Service and Repair
Installation
INSTALLATION
NOTE: LHD model shown. RHD model similar.
1. Install the evaporator temperature sensor (2) into HVAC housing (3).
2. Connect the HVAC wire harness connector (1) to the evaporator temperature sensor.
3. Install the glove box into the instrument panel See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument
Panel Glove Box - Installation.
4. Reconnect the negative battery cable.