Charger V8-5.7L (2008)
7. Position the front floor distribution duct (2) onto the air distribution housing (3).
8. Install the six screws (1) that secure the front floor distribution duct to the air distribution housing. Tighten the screws to 2 Nm (17 in. lbs.).
9. If equipped with dual zone heating-A/C, install the blend door cam (1) onto the blend door lever (2) and the pivot shaft located on the passenger
side of the air distribution housing (3).
10. If equipped with dual zone heating-A/C, position the blend door actuator mounting bracket (5) onto the passenger side of the air distribution
housing (3).
11. Install the screws (4) that secure the blend door actuator mounting bracket to the air distribution housing. Tighten the screws to 2 Nm (17 in. lbs.).
12. Position the blend door actuator (2) onto the air distribution housing. If necessary, rotate the actuator slightly to align the splines on the actuator
output shaft with those on the blend door cam See: Air Door/Air Door Actuator / Motor/Service and Repair/Blend Door Actuator - Installation.
13. Install the screws (1) that secure the blend door actuator to the air distribution housing. Tighten the screws to 2 Nm (17 in. lbs.).
