Charger V8-5.7L (2008)
Seat Heater Control Module: Service and Repair
Rear Seats
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using an appropriate flat bladed tool, remove the heated seat switch/modules (5) from the console (2) by gently prying up from the edge of the
switch/module bezel (4). Take care not to scratch or damage the console or bezel in any way.
3. Disconnect the switch/module electrical connectors (2) and (4).
4. Using an appropriate flat bladed tool, remove the heated seat switch/module (3) from the bezel (1).
Installation
INSTALLATION