Charger V8-5.7L (2008)
4. Install the screws (1) that secure the curtain airbag to the spring nuts in the roof side rail. Torque screws to 5 Nm (44 in. lbs.).
5. Connect the curtain airbag squib connector (2) to the inflator (3).
6. Install the headliner into the vehicle See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Installation.
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE
SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Supplemental Restraints
Verification Test
Driver Airbag - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component
service. Failure to do so may result in accidental airbag deployment, personal injury or death.
