Charger V8-5.7L (2008)
Seat Belt Height Adjuster: Service and Repair
Installation
INSTALLATION
1. Position height adjuster making sure that indexing tab is in the proper hole.
2. Install the two mounting bolts (1). Torque bolts to 32 Nm (24 ft. lbs.).
3. Install the upper B-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim.
4. Position the upper turning loop (3) and install the retaining bolt (4). Torque bolt to 40 Nm (30 ft. lbs.).
5. Install the upper turning loop (3) trim cover (2).
