Charger V8-5.7L (2008)
3. If equipped with ESP , remove the steering angle sensor screw located at the six o'clock position on the SCCM and remove the steering angle
sensor (1) from the SCCM (2). If not equipped with ESP , there will be a plastic insert there for strengthening of the SCCM that will lift right
out.
4. If equipped with manual telescoping column , remove the strut screw, located at the six o'clock position, and strut (1).
5. If equipped with electronic telescoping column , remove the one remaining screw (4) to electric tilt located at the six o'clock position, and
remove stalk and switch (3).
