dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Arm|Front|Page 7958 > < Control Arm|Front|Page 7956
Page 20
background image

WARNING: Before opening fuel system, review all Warnings and Cautions.

3. If servicing left side, remove fuel filler tube. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Fuel Filler Neck/Service

and Repair/Removal

4. Position an extra pair of jack stands under and support forward end of engine cradle to help stabilize vehicle during rear suspension

removal/installation.

5. Perform following if vehicle is equipped with dual-exhaust or are servicing right side on vehicle with single exhaust.

a. Position under-hoist utility jack or stand several inches below exhaust at muffler.
b. Disconnect exhaust isolators at muffler and resonators hangers.
c. Lower exhaust down to rest upon top of jack or stand placed below muffler.

6. Position under-hoist utility jack or transmission jack (3) under center of rear axle differential (1). Raise jack head to contact differential and secure

in place. When securing crossmember to jack, be sure not to secure stabilizer bar. 

Control Arm|Front|Page 7958 > < Control Arm|Front|Page 7956