Charger V8-5.7L (2008)
Rear Knuckle Alignment Link: Service and Repair
Compression Link
Removal
REMOVAL
1. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then rear tire and wheel assembly (1).
3. Remove bolt and nut (2) mounting link (3) at knuckle.
4. Remove bolt and nut (1) mounting link (3) at crossmember.
5. Remove link (3).
Installation
INSTALLATION
NOTE: Although the compression link is different end-to-end, there is no top and bottom.