Charger V8-5.7L (2008)
5. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)). See: Wheels and
Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
6. Lower vehicle.
7. Position vehicle on alignment rack/drive-on hoist. Raise vehicle as necessary to access lower mounting bolt.
8. Tighten shock absorber lower mounting bolt nut (4) to 72 Nm (53 ft. lbs.).
Load-Leveling
LOAD-LEVELING
1. Install shock absorber (3) by setting lower end into pocket in spring link (4), then tipping top inward until aligned with upper mounting holes.
