Charger V8-5.7L (2008)
3. Remove fill plug (1) to check and adjust rear axle fluid level. Top off axle with Mopar(R) Gear and Axle Lubricant 75W-140. Reinstall fill plug
torque to 60 Nm (44 ft. lbs.) torque.
Removal
REMOVAL
1. Remove rear axle assembly from vehicle.
2. Measure axle assembly rotating torque and record measurement for reuse on assembly.
3. Using Flange Wrench C-3281(1) and 41mm socket, remove pinion flange nut and discard.
