dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Hood Latch|Removal|Page 10770 > < Hood Hinge|Removal|Page 10765
Page 1
background image

Hood Latch: Service and Repair
Removal

REMOVAL

1.   Disconnect and isolate the battery negative cable.

2.   Unsnap the left underhood appearance cover (4) from the headlamp mounting crossmember (1).

3.   Disengage the interlocking feature on the inboard end of the left underhood appearance cover from the inboard end of the right cover (2) and

remove it from the vehicle.

4.   Unsnap the right underhood appearance cover from the headlamp mounting crossmember and remove it from the vehicle.

5.   Mark the location of the hood latch (2) on the front of the headlamp mounting crossmember (1) to aid reinstallation.

6.   Remove the two screws (3) that secure the latch to the front of the crossmember.

Hood Latch|Removal|Page 10770 > < Hood Hinge|Removal|Page 10765