Charger V8-5.7L VIN H (2007)
10. Install and tighten the two screws (1) that secure the front of the console shifter bezel to the console. Tighten the screws to 3 Nm (23 in. lbs.).
11. Position the mat (5) into the console rear bin with the curved edge oriented forward in the vehicle.
12. Position the mat (2) into the cubby bin at the front of the floor console.
13. Firmly push shifter trim ring (4) down the to position it to the gear selector.
14. Place the gear selector lever into the Park position.
NOTE: For vehicles equipped with the optional Automatic Express Up power window feature, calibration of this feature is required whenever
power to the door module is disrupted.
A battery reconnect procedure must be performed anytime the battery has been disconnected.
15. Reconnect the battery negative cable.
Center Console Cover with DVD
1. Install console cover.
2. Install six screws.
3. Replace side covers.
