Charger V8-5.7L VIN H (2007)
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
Front Door Trim Panel - Installation
INSTALLATION
1. Check to be certain that the five spring nuts (1 and 3) are properly installed and in good condition on the inside of the door (2).
2. Check to be certain that the three plug grommets (1 and 2) are properly installed and in good condition on the inside of the door.
3. Installing a new door trim panel (1) with the original door module (6) or new door module (6) the module can be attached by using screws or heat
stake the door module (6) to the trim panel. If the door module (6) was removed or being replaced, use screws to attach door module (6) to the
second set of bosses on the door trim panel (1).. If the door module (6) was removed or being replaced, use screws to attach module to the second
