Charger V8-5.7L VIN H (2007)
1. Engage the seat belt webbing through the slit and into the slot in the upper end of the lower B-pillar trim (3) and position the trim to the inside of
the B-pillar (1). Be certain the webbing is not twisted.
2. Press fit the lower end of the lower B-pillar trim to the front and rear door opening sills.
3. Install and tighten the two screws (4) that secure the lower end of the B-pillar trim to the front and rear door sills. Tighten the screws to 2 Nm (22
in. lbs.).
4. Move aside the seat belt webbing to install and tighten the two screws (2) that secure the upper end of the lower B-pillar trim to the inside of the
B-pillar. Tighten the screws to 2 Nm (22 in. lbs.).
5. Reinstall the scuff plate trim onto the rear door sill.
6. Reinstall the lower cowl trim onto the front door opening sill.
Removal
UPPER
1. Remove the lower trim from the inside of the B-pillar (2).
2. Unsnap and remove the trim cover (3) from the seat belt turning loop on the inside of the upper B-pillar.
3. Remove the screw (1) that secures the turning loop to the seat belt height adjuster on the upper B-pillar.
4. Lower the seat belt (4) and turning loop from the B-pillar.
