Charger V8-5.7L VIN H (2007)
1. With the 40% seat back removed.
2. Place 60% seat back (5) into position on the studs.
3. Fold the 60% section of the seat down.
4. Install the four nuts (6) attaching seat back (5). Tighten nuts to 57 Nm (42 ft. lbs.).
60/40 Seat Back - Wagon
40% SEAT BACK SIDE
1. Place the 40% section (2) into position.
2. Slide 40% seat back onto the pivot pin (3) located on the 60% seat back.
3. Install the two nuts (5) attaching seat back. Tighten nuts to 57 Nm (42 ft. lbs.).
60/40 Seat Back Domestic Sedan
60% SEAT BACK SIDE