Charger V8-5.7L VIN H (2007)
Hydraulic System Junction Block: Description and Operation
Description
DESCRIPTION
A junction block is used on vehicles that are not equipped with antilock brakes (ABS) allowing use of the same brake tubes on all applications. The
junction block is located in the engine compartment, in front of the right wheel well. The junction block mounts in the same location as the ABS
integrated control unit (ICU) does on vehicles with ABS.
It has six threaded ports to which the brake tubes connect. Two are for the brake tubes coming from the master cylinder. The remaining four ports are for
the brake tubes going to each wheel brake assembly.
The junction block contains a proportioning valve. The proportioning valve is not serviced separately from the junction block.
