dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Gauge Sender|Removal|Page 12129 > < Fuel Gauge Sender|Removal|Page 12127
Page 5
background image

16. Lift level sending card straight up and out of module.

17. Disconnect the electrical wiring from module.

18. Remove level sending card.

Right Side Module

RIGHT SIDE MODULE

1. Release the fuel pressure, refer to the Fuel Pressure Release Procedure.

2. Disconnect negative battery cable.

NOTE:  The fuel level of the vehicle must be below 5/8 of a tank before you remove the module lock-rings. If it is above that you can spill fuel in
the vehicle.

Fuel Gauge Sender|Removal|Page 12129 > < Fuel Gauge Sender|Removal|Page 12127