Charger V8-5.7L VIN H (2007)
Spot Lamp: Service and Repair
Lamp-Spot - Police
Removal
REMOVAL
1. Remove the PDC cover and pull the fuse, depending on which spot lamp is being serviced.
2. Raise the spot lamp from the stowed to the operating position.
3. Support the spot lamp sealed beam in position.
4. Remove the screws (1) retaining the bezel to the spot lamp head assembly.
5. Remove the bezel from the spot lamp head assembly.
6. Tilt the sealed beam (2) away from the spot lamp head assembly.
7. Disconnect the electrical connector to the spot lamp head assembly.
8. Remove the bulb from the lamp housing by moving the hold downs.
9. Remove bulb from lamp.
Installation
INSTALLATION
1. Position bulb into spot lamp assembly.
