dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/C Discharge Line|Page 1897 > < A/C Discharge Line|Page 1895
Page 2
background image

NOTE:  LHD model shown. RHD model similar.

9. Lower the vehicle.

10. Remove the nut (1) that secures the front section of the A/C liquid line (2) to the rear section of the liquid line (3).

11. Disconnect the front section of the A/C liquid line from the rear section of the liquid line and remove and discard the dual plane seal.

12. Install plugs in, or tape over the opened liquid line fittings.

13. Remove the front section of the A/C liquid line from the engine compartment.

REAR SECTION

NOTE:  LHD model shown. RHD model similar.

14. Disconnect and isolate the negative battery cable.

15. Recover the refrigerant from the refrigerant system.

16. On LHD models, remove the air cleaner housing.

17. Remove the nut (6) that secures the front section of the A/C liquid line (8) to the rear section of the liquid line (10).

18. Disconnect the front section of the A/C liquid line from the rear section of the liquid line and remove and discard the dual plane seal.

19. Install plugs in, or tape over the opened liquid line fittings.

20. Remove the nut (7) that secures the front section of the A/C suction line (9) to the rear section of the suction line (12).

21. Disconnect the front section of the A/C suction line from the rear section of the suction line and remove and discard the dual plane seal.

A/C Discharge Line|Page 1897 > < A/C Discharge Line|Page 1895