Charger V8-5.7L VIN H (2007)
Throttle Body: Service and Repair
Removal
5.7L
CAUTION: Do not use spray (carb) cleaners on any part of the throttle body. Do not apply silicone lubricants to any part of the throttle body.
1. Remove rubber air duct at front of throttle body.
2. Disconnect electrical connector (3) at throttle body (1).
3. Remove four throttle body mounting bolts (2).
4. Remove throttle body from intake manifold.
5. Check condition of throttle body O-ring (2) at front of intake manifold (1).
