Charger V8-5.7L VIN H (2007)
When the vehicle reaches the speed desired, push the lever down and release ("SET/DECEL"). The EVIC will display the set speed.
Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs:
-
The message "DRIVER OVERRIDE" will display in the EVIC.
-
The system will not be controlling the distance between your vehicle and the vehicle ahead.
-
The vehicle speed will only be determined by the position of the accelerator pedal.
To Cancel:
The system will disable ACC without erasing the memory if:
-
You softly tap the brake pedal.
-
You depress the brake pedal.
-
You push the speed control lever away from you ("CANCEL").
-
If ESP/TCS activates.
To Turn Off:
The system will turn off and erase the set speed in memory if:
-
You push and release the lever ("ON/OFF").
-
You turn off the ignition.
-
You switch off ESP.
To Resume Speed:
Push the lever up and release ("RES/ACCEL"), and then remove your foot from the accelerator pedal. The EVIC will display the last set speed.
