dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seat Position Sensor > < Seat Occupant Sensor|Removal|Page 1533
Page 3
background image

4. Install the adjuster to riser mounting bolt (3). Torque nuts to 45 Nm (33 ft. lbs.).

5. Install the front passenger seat bolts.

WARNING:  Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.

WARNING:  Following successful completion of the Airbag System test procedure, the Occupant Classification System Verification Test
must be done using a scan tool and the appropriate diagnostic information.

Seat Position Sensor > < Seat Occupant Sensor|Removal|Page 1533