Charger V8-5.7L VIN H (2007)
CAUTION: If the tension strut bolt at the engine cradle has a lengthwise grooved shaft (2), it is a special wheel alignment adjustment bolt
and the bolt head (1) must not be rotated in the vehicle or damage to the bolt and engine cradle will result. While holding the bolt in place
with a wrench, remove the nut, then slide the bolt out of the bushing and cradle taking note of bolt positioning in engine cradle for
reassembly purposes. The bolt needs to be installed in the same position as removed to make sure wheel camber and caster return to
adjusted position.
8. Remove nut and bolt (2) securing tension strut (1) to engine cradle (3).
9. Slide tension strut out of cradle bracket and remove from vehicle.
Installation
INSTALLATION
NOTE: If installing a tension strut engine cradle bolt that is a wheel alignment adjustment bolt (lengthwise grooved shaft (2)), make sure to
install it in the same position which it was in upon removal. For more details on installation of this special bolt, refer to Suspension Wheel
Alignment Standard Procedure.
