Charger V8-5.7L VIN H (2007)
6. Unsnap the gear shift lever boot (2) from the cluster bezel (3). Slide the boot up the gear shift lever (1), away from the bezel.
7. Remove the gear shift lever mounting screw (1).
8. Slide the gear shift lever (2) out of the column shift mechanism and remove the lever with AutoStick wiring.
Installation
INSTALLATION
1. Feed the AutoStick wiring through the hole in the cluster bezel and slide the gear shift lever (2) into the column shift mechanism.
NOTE: Before installing gear shift lever mounting screw, clean screw threads and apply Mopar(R) Lock & Seal Adhesive.
2. Line up the threaded hole in the lever with the hole in the shift mechanism and install the gear shift lever mounting screw (1). Tighten the screw to
