Charger V8-5.7L VIN H (2007)
3. Remove fill plug (1) to check and adjust rear axle fluid level. Top off axle with Mopar(R) Gear and Axle Lubricant 75W-140. Reinstall fill plug
and torque to 50 Nm (37 ft. lbs.) torque.
Removal
REMOVAL
1. Remove rear axle assembly from vehicle.
2. Measure axle assembly rotating torque and record measurement for reuse on assembly.
3. Using Flange Wrench C-3281(1) and 41 mm socket, remove pinion flange nut and discard.
