Charger V8-5.7L VIN H (2007)
Power Window Switch: Service and Repair
Power Window Switch
Removal
REMOVAL
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected.
1. Disconnect and isolate the battery negative cable.
2. Remove rear door trim panel.
3. Remove switch (1) from door trim panel (2).
Installation
INSTALLATION
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected.
1. Install switch (1) to rear door trim panel (2).
2. Install rear door trim panel.
3. Connect battery negative cable.