Charger SRT-8 V8-6.1L (2009)
Ambient Light Sensor: Service and Repair
Auto Headlamp Sensor - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the defroster grille See: Heating and Air Conditioning/Air Register/Service and Repair/Defroster Grille - Removal.
3. Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the auto headlamp sensor (1).
4. Pull the sensor from the top of the instrument panel.
5. Disconnect the one electrical connector.
