Charger SRT-8 V8-61L VIN W (2006) Rear Bumper Cover / Fascia TSB Page 6818
Rear Bumper Cover / Fascia: Service and Repair
FASCIA-REAR
REMOVAL
1. Raise and support the vehicle.
2. Remove the three push-pin retainers (1) that secure each rear wheel house splash shield (2) to the rear fascia assembly (3).
3. Remove the screw (2) that secures the rear fascia assembly (3) to the nut insert (1) in each quarter panel.
NOTE: 300 Shown. Magnum and Charger similar.