Charger SRT-8 V8-6.1L VIN W (2006)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Trunk Lining
TRUNK LINING
REMOVAL
1. Remove the spare tire cover/trunk floor carpet from over the spare tire well.
2. Remove the trunk rear trim panel from the luggage compartment. Refer to Trim Panel.
3. Remove the three push-pin fasteners (2) that secure the right or the left trunk side trim (1) to the appropriate locations within the luggage
compartment.
4. Remove the trunk side trim from the luggage compartment.
INSTALLATION
1. Position and fit the right or the left trunk side trim (1) within the luggage compartment.
2. Install the three push-pin fasteners (2) that secure side trim to the appropriate locations within the luggage compartment.
3. Reinstall the trunk rear trim panel into the luggage compartment.
4. Reinstall the spare tire cover/trunk floor carpet over the spare tire well in the luggage compartment.