Charger SRT-8 V8-6.1L VIN W (2006)
Trunk / Liftgate Lock Cylinder: Service and Repair
LOCK CYLINDER - POLICE ONLY
REMOVAL
NOTE: Magnum Police Only
1. Open liftgate.
2. Remove fasteners (2) attaching liftgate lower trim panel.
3. Disconnect remote handle link from lock cylinder.
4. Remove lock cylinder clip from lock cylinder.
5. Remove lock cylinder.
INSTALLATION
NOTE: Magnum Police Only
1. Open liftgate.
2. Reinstall lock cylinder into liftgate lock hole.
3. Fasten lock cylinder to liftgate using lock cylinder clip.
4. Connect remote handle link to lock cylinder.
5. Reinstall lower liftgate trim panel.