Charger SRT-8 V8-6.1L VIN W (2006)
6. Remove the eight fasteners (3) affaching sunroof assembly.
7. With the aid of a helper, support the sunroof and remove the fasteners (2) attaching sunroof assembly (1) to roof panel.
8. Remove the sunroof(1) from vehicle.
INSTALLATION
WARNING: The Excessive Force Limitation (EFL) feature must be calibrated any time a sunroof motor/module is replaced with a new component.
Failure to perform this procedure could result in vehicle damage and/or personal injury.
1. Verify that glass panel is loose and slightly retracted.
2. Raise sunroof module assembly (1) and guide it carefully into position.
