Charger SRT-8 V8-6.1L VIN W (2006)
Brake Hose/Line: Testing and Inspection
TUBES/HOSES
INSPECTION
Brake tubing should be inspected periodically for evidence of physical damage or contact with moving or hot components.
Flexible rubber hose is used at both the front and rear wheel brakes. Inspection of the flexible brake hoses should be performed whenever the brake
system is serviced and every 7,500 miles or 12 months, whichever comes first. Inspect hydraulic brake hoses for surface cracking, scuffing, or worn
spots. If the fabric casing of the hose becomes exposed due to cracks or abrasions in the hose cover, the hose should be replaced immediately.
Eventual deterioration of the hose can take place with possible burst failure. Faulty installation can cause twisting, resulting in wheel, tire, or chassis
interference.
