Charger SRT-8 V8-6.1L VIN W (2006)
10. Connect front parking brake cable (5) at connector (3) to right rear parking brake cable (4) (axle differential not shown).
11. Install screw (2) fastening cable (1) routing bracket to rear crossmember front flange (3).
12. Position lower rear wheelhouse shield (3) onto body of vehicle. Install nuts (1), bolt (2) and pushpins (4) securing lower rear wheelhouse shield to
body Tighten nuts and bolt securely
13. Position lower front wheelhouse shield (3) onto body of vehicle. Install push-pins (1) securing lower front wheelhouse shield to front wheelhouse
shield (2) and body.
14. Lower vehicle until rear wheels are just above floor level.
15. Apply parking brake lever. Release lever, then reapply.
